4agze problem

4agze problem 4agze problem Rate Topic:

#1 gze-power

Member

Group: Members
Posts: 52
Joined: 08-August 08

Posted 12 June 2011 - 07:06 AM

Hi there,

My 4agze is having a problem from which I did not find out what this could be.

The engine-light burns constantly on the dashboard, even when I connect E1 and TE1 in the diagnostic connector. So it is impossible to read out any code.

The problems are as followed:

When I start the engine, it seems to be that the engine is running on 2 or 3 cilinders. Shortly after the cold start it runs so slowly that he dies and the engine will turn off after a few seconds...

Once the engine is running, the engine runs very rich (exhaustgasses stinks extremely ) and the more I will give gass to accelerate, the more the engine is stuttering. It runs maximum of about 3500 rpm and max. speeds is about 120 km/h. Completely out of power.

Please who can help me with tis problem?

See a movie on youtube:

This post has been edited by gze-power: 12 June 2011 - 07:08 AM

#2 ap7

Regular poster

Group: Members
Posts: 124
Joined: 15-February 08
Gender:Male
Location:Sydney

Posted 14 June 2011 - 01:11 PM

Blocked cat-convertor!? Had a similar thing happen to me...

This post has been edited by ap7: 14 June 2011 - 01:12 PM

#3 gze-power

Member

Group: Members
Posts: 52
Joined: 08-August 08

Posted 14 June 2011 - 05:13 PM

Cat-convertor is ok, never had any problems with it...

This post has been edited by gze-power: 14 June 2011 - 05:17 PM

#4 saki

Member

Group: Members
Posts: 53
Joined: 31-July 11

Posted 15 August 2011 - 09:37 AM

Fixed yet or not? Sounds more like ignition. Leads still working and plugged correctly ? Plugs good? Coilpacks still working?
Next place I'd check after ign is fuel. Go basics first, fuel filter blocked? Good fuel your using? Injectors blocked? Fuel lines kinked, blocked damaged?